2008 KTM 690 Enduro Adventure Must See Only 330 miles! in Toronto, Illinois

This bike is awesome well equipped with the right products and ready to race! Optional parts installed on this Adventure Machine are:
EVO2 Fairing KIT - All parts either CNC machined aircraft-spec aluminum or laser-cut  stainless-steel or aluminium sheet. Fitted  and securely to the bike, no welding or drilling required. Comes complete with all necessary OEM screws and lighting. Uses our unique Rally-style twin headlight & screen, much improved lighting output than OEM unit fitted to 690 Enduro. The headlight is E marked & TUV approved and has a "fish-eye" low beam with a halo-effect running light above, and an H5 55W high beam. At present the headlight unit is only available in Right-Traffic(dip to right) and due to stock fluctuation will either be supplied in black or chrome. Incorporating our own CAD designed, and rally-tested, cockpit support which has been race tested over the last 3 years. The fairings are designed with mounting points for the OEM front turn flashers to be fitted. Also fitted with plastic-moulded OEM KTM 950 dashboard to accept E speedo,or R speedo with our adaptor plate. Total fitted weight of kit to bike is 5.84 Kg (12.8 lbs)
 EVO2 TANK KIT  - Our new EVO2 Tank Kits have been CAD designed to fit  KTM 690 Enduro, and hold an extra 10 litres capacity of fuel, ideal for the longer trips or rallies. Width with tanks fitted, measuring at triple clamp is 450mm.  These are rotational-moulded in Polyethylene comes in natural , in either Black, Orange, White or Natural (semi-opaque) and come complete with all fixings required to fit the kit.The fuel tanks are connected into the OEM rear tank using our billet adaptor system. Each tank is fitted with its own fuel tap, so they can be independently turned on or off. Both tanks are supplied with Acerbis Cap & breather.Complete with all necessary fixings, so bike can be returned to standard, if required when the kit is removed. No disruption to the OEM air filter cover, seat removal is not affected, and does not interfere with filter maintenance.Both tanks are very easy to remove in a couple of minutes, for routine maintenance.  All our tanks have been race-tested on most major rallies around the world, and as such, we are confident that they will survive most efforts to damage them, in the event of a crash impact.They are also chemically Fluorinated after moulding, this ensures that the tanks do not leach vapors through the plastic, which can cause "sweating" of the tanks and also causes graphics to lift off over time, this is a process which is not used by many other after-market tank manufacturers.  Total fitted weight 4Kgs. NOTE: WHEN FITTING THIS KIT TO A US/CANADA SPEC BIKE, YOU MUST REMOVE THE EMISSIONS CANISTER or RELOCATE